Hotline:

400-997-0881

No.3, Jiangjunzi Road, Bangjiangxi Village, Dalong Street, Shiqi Town, Panyu District, Guangzhou City

E-Mail:yxipx@yxipx.com

Fax:020-34722227

 

WeChat

Links:

Copyright © 2019 Guangzhou Yuexin Test Equipment Co., Ltd.   ICP:粤ICP备13080521号  By:www.300.cn

News

Continuous improvement, professional attitude, teamwork

Tips in using bicycle light rain test machine

Author:
岳信
Source:
岳信
Release time:
2020/04/25
[Abstract]:
The bicycle lamp rain test machine mainly uses the different spray angles of the swing tube to test the bicycle lamp against rain and splash water. Under normal circumstances, the box structure is recommended to customers, because the circulating water system used in this bicycle light rain test machine is not restricted by the use of the site.
The bicycle lamp rain test machine mainly uses the different spray angles of the swing tube to test the bicycle lamp against rain and splash water. Under normal circumstances, the box structure is recommended to customers, because the circulating water system used in this bicycle light rain test machine is not restricted by the use of the site.
 

This bicycle light rain test machine is composed of a steel outer box, a stainless steel inner box, a swing tube, a sample turntable, a 7-inch touch screen, a water pump and other components. The operating system is independently designed and developed by the engineer of Yue Xin. It is precisely controlled while operating. It's also very simple.

自行车灯淋雨试验机

However, because the operator is not familiar with the bicycle light rain test machine during the use process, it is inevitable to cause some wrong operations or ignore some precautions, so the editor here summarizes some tips to make you use it more Convenience.
 
1. Enter the manual interface, open the water pump and the solenoid valve of the pendulum pipe, observe the water sprayed by the needle, the straight line is good, and the curved line needs to be replaced with a new one;
 
2. Before the test, click the pendulum tube to reset to zero, so that you can directly enter the test, avoiding that the pendulum tube is not reset and cannot be started.

自行车灯淋雨试验机

3. First fix the sample on the sample turntable, and then adjust the height of the sample turntable to determine the 200mm metering tube of the sample housing;
 
4. After the test is completed, when testing again, be sure to click the data reset and the swing tube reset, and then the test can be performed.
 
5. If there are water marks on the stainless steel inner box, clean it up in time. If you find rust and dirt, you can wipe it with a scouring pad.
 
If you have more requirements and questions about the bicycle light rain test machine, you can contact our online customer service at any time.
 
Yue Xin-Focus on the development and production of bicycle light rain test machine, and look forward to communicating with you every time.
 
This article is an original article by Guangzhou Yuexin Test Equipment Co., Ltd., and may not be reproduced without permission.